Mobotix D22

Mobotix D22 Camera

Inconspicuous surveillance with state-of-the-art technology. The D22 FixDome from MOBOTIX adapts perfectly to any task. Exchangeable lenses, various mounting and configuration options including vandalism set support unlimited application possibilities. Photo by MOBOTIX camera with license plate recognition

MOBOTIX HiRes video replaces up to 6 cameras

Attractively designed FixDome camera featuring exchangeable lenses from tele to wide-angle
Numerous installation options both indoor and outdoor
On-wall set with space for extension modules (battery, UMTS, WLAN, etc.)
Integrated DVR with HiRes video recording
Robust, low-maintenance and weatherproof from -30° to +60°C (-22° to +140°F), (IP65)
Digital continuous zoom, pan and tilt
Can be upgraded to an intercom system with the MOBOTIX ExtIO module

Buy Online

Technical Specs
Accessories
Models
Mounting

Technical Specifications D22 MonoDome
Models	Basic, IT, IT-Night, Sec, Sec-Night
Lenses	22 to 135 mm format, horizontal angle 90° to 15°
Sensitivity	Color: 1 lux (t=1/60 s), 0,05 lux (t=1/1 s) B/W: 0,1 Lux (t=1/60 s), 0,005 Lux (t=1/1 s)
Sensor	1/2“ CMOS, progressive scan
Max. image resolution	Color: 2048 x 1536 (3Mega), Black/White: 1280 x 960 (Mega)
Image format	2048 x 1536, 1280 x 960, 1024 x 768, 800 x 600, 768 x 576 (D1), 704 x 576 (TV-PAL), 640 x 480, 384 x 288, 352 x 288, 320 x 240, 160 x 120; free image format selection (e.g. 1000 x 200 for skyline)
Max. frame rate (M-JPEG) (Live/Recording)	VGA: 16 fps, TV-PAL: 12 fps, Mega: 6 fps, 3Mega: 4 fps
Max. Video stream (MxPEG) (Live/Recording/Audio)	VGA: 30 fps, TV-PAL: 24 fps, Mega: 14 fps, 3Mega: 10 fps
Image compression	MxPEG, M-JPEG, JPG, H.263 (Video-VoIP-Telephony)
Internal DVR	Slot for SD card (up to 16 GB)
External storage	Directly on NAS and PC/Server without additional recording software
Software (inclusive)	Video-Management-Software MxEasy, Control room software MxControlCenter
Image processing	Backlight compensation, automatic white balance, image distortion correction, video sensor (motion detection)
Virtual PTZ	Digital Pan/Tilt/Zoom, continuous 8x zoom
Alarm/Events	Triggering of events by integrated multiple-window motion detection, external signal, temperature sensor, notification over email, FTP, IP-Telephony (VoIP, SIP), visual/acoustic alarm Pre- and post-alarm images
Audio	Optional via ExtIO, video VoIP supported
Interfaces	Ethernet 10/100, USB, Audio (microphone/speaker)
Audio/Telephony	VoIP, SIP, two-way speaker, remote controlling of the camera in- and outputs, event notification
Security	User-/Group management, HTTPS/SSL, IP address filter, IEEE 802.1x, Intrusion Detection
Certificates	BGV C9 (“UVV”), EMV (living environments, industry), EN 50155 (shock, vibration, temperature), CE, FCC
Power supply	Year-round power over Ethernet (IEE 802.3af; Class 0), Netpower-Adapter, typ. 2,5 W
Operating conditions	IP65 (DIN EN 60529), -30° bis +60 °C (-22°F to +140°F)
Dimensions	Ø x H: 16 x 8,6 cm, Weight: ca. 350 g
Standard delivery	Housing (high-resistance composites - PBT-PC), white, shockproof polycarbonate dome transparent, free choice of lenses, mounting parts, allen wrench, patch cable, manual, software

Available Accessories for MonoDome D22M
In-Ceiling Set for D22 and Q22	On-Wall Set for D22 and Q22	Vandalism Set

Consists of in-ceiling mount and mounting parts Easy mounting from front Installation dimension: ∅ 150 mm	Consists of on-wall mount and mounting parts Protects the cabling Allows integrating additional modules	Stainless steel cover available in polished, matt, gray, black, white
Outdoor Wall Mount for D22 and Q22	Pole Mount for D22 and Q22	ExtIO Extension Module

Weatherproof (IP65) wall mount for D22 MonoDome Covers RJ45 wall outlets Space for expansion modules (battery, UMTS, WLAN, etc.)	Fastening for Dome wall mount 3 mm stainless steel, white Delivery includes mounting parts and 2 stainless steel straps for pole diameters of 60 - 180 mm	Microphone/speaker PIR sensor for motion detection, temperature sensor Integrated switch functions

Camera models
MOBOTIX cameras are available in different models with various functions	BASIC	WEB	IT	SECURE
Maximum resolution VGA (640 x 480 pixels)
Maximum resolution 3MEGA (2048 x 1536 pixels)
PTZ function Digital pan, tilt, zoom without mechanically moving parts (software-driven)
Internal long-term storage in the camera Data storage up to 8/16 GB (CF/SD card, depending on model)
External data storage (via network by the camera) Recording up to 1 Terabyte on PC/Server/NAS
Image transfer is time- and event-driven Data transfer via FTP or E-Mail (web function)
Audio function Video recording with lip-synchronous audio
Available cameras	D22, Q22	M12	M12, M22, D12, D22	all cameras

Mounting Options

Mounting to a Ceiling or Wall

The MOBOTIX D22M has been designed to be mounted to either ceilings or to a wall, when using the Wall Mount. The supplied L22 90° lens then allows monitoring almost the entire room from the walls to the ceiling. It is also possible to mount the D22M directly to a wall (without using the Wall Mount), but doing so will result in reduced flexibility for positioning the lens. We hence recommend using the Wall Mount if you intend to mount the camera to a wall.

Additional Mounting Options for IT/Secure Models

On-Wall Mounting (D22M-OPT-AP)
The On-Wall set can reliably protect external cables if the cables cannot be guided from below the housing but have to be led above the wall. In addition, the On-Wall mount provides ample space for extra modules.
In-Ceiling Mounting (D22M-OPT-TC)
The In-Ceiling Set allows mounting the camera in fake ceilings, for example. This type of installation provides optimum protection for the camera and reduces the visible profile to a minimum since only the dome is visible.
Vandalism Protection (D22M-OPT-VANDAL-...)
The Vandalism Set provides added protection for the cameras. The set consists of a robust camera ring made from stainless steel and a reinforced dome made from 3 mm thick polycarbonate. A camera equipped with the Vandalism Set is perfectly suited for applications in demanding environments (such as prisons, social hot-spots, train stations, etc.).
Mounting to a Wall Using the Wall Mount (D22M-OPT-WH)
The Wall Mount is the ideal solution for mounting the camera to walls for indoor and outdoor applications. The camera is absolutely dustproof and resistant against water jets (IP65). The wall mount also covers RJ45 wall outlets and also has ample space for additional modules.
Mounting to Poles Using the Corner and Pole Mount (D22M-OPT-MH)
If you would like to mount the camera to a pole or the corner of a building, you should consider using the MOBOTIX Corner and Pole Mount. This mount can only be used in conjunction with the wall mount. The supplied stainless steel straps allow fixing the mount to poles with diameters between 60 and 180 mm (2.4 to 7.1 in).

Mounting Types D22M-Basic

The MOBOTIX D22M-Basic consists of the camera housing with the motherboard, the lens and the dome.

Mounting Types D22M-IT/Secure

The MOBOTIX D22M-IT/Secure consists of the camera housing (motherboard, lens, dome), the outer shell and the mounting ring.

Mounting Instructions

Wall Mount

The Q22M/D22M Wall Mount is the ideal solution for mounting the Q22M to walls for outdoor applications.The camera is absolutely weatherproof (IP65). The wall mount has ample space for additional modules (UMTS, WLAN etc.).

The Wall Mount also covers RJ45 wall outlets and also has ample space for additional modules.

Pole Mount

If you would like to mount the MOBOTIX D22M to the corner of a building or a pole, you should consider using the MOBOTIX Pole Mount, which is used in combination with the wall mount. The supplied stainless steel straps allow fixing the mount to poles with diameters between 60 and 180 mm (2.4 to 7.1 in).

The Pole Mount is made from 3 mm white powdercoated stainless steel and is just as robust and maintenance-free as the outdoor Wall Mount.

Adjusting the Lens

Manually adjust the lens of the D22M in a simple way.

Mounting/Dismounting the outer shell (For IT-/Secure models only)

Always use the Allen screws, included in the delivery (or security screws and spacers for Vandalism Set).
Mounting/Dismounting the Dome
Take the delivered plastic foil or a cotton cloth and remove the dome by turning it in counter-clockwise direction. Make sure that you remove the camera's outer shell on IT/Secure models before you attempt to do this.
Release the lens' lock ring and adjust the image focus by turning the lens in its holder. Check the image on the computer monitor. Make sure that you tighten the lock ring again once you are finished. When tightening the lock ring, firmly hold the lens to prevent it from losing the focus setting.

Connecting the Camera

The MOBOTIX camera does not require any software installation; all you need is your preferred browser with JavaScript support to operate the camera. Thus, the MOBOTIX camera is supported by all common operating systems (such as Windows, Macintosh and Linux, ...).

If the camera is supplied with Power over Ethernet (a PoE switch), then no other device will be necessary for supplying power.

Establishing the Power Supply to the Camera

You can choose between the following options:

External power supply and Network Power Adapter (MX-NPA-3-RJ): Power supply of one camera injected into the network cabling (max. length 100 m (110 yd)), from the NPA to the 10BaseT/NET connector of the camera.
Network Power Box/Rack (MX-NPR-4, or 8/20): Power supply of 4/8/20 cameras injected into the network cabling (max. length 100 m (110 yd)), from the NPR to the 10BaseT/NET connector of the camera.
Power over Ethernet: Power supply using network components that are conforming to the PoE standard.

Power Supply (MxPoE) Using a Switch

Connect the factory pre-installed cable of the camera to the Camera connector of the Network Power Adapter.
Connect the LAN/Power connector of the Network Power Adapter to an Ethernet connector of the switch/router or the Ethernet wall outlet.
Plug the RJ45 connector of the external power unit into the PC/Power connector of the Network Power Adapter.

Power Supply (MxPoE) When Connected Directly to a Computer

Connect the factory pre-installed cable of the camera to the Camera connector of the Network Power Adapter.
Connect the PC/Power connector of the Network Power Adapter to the Ethernet port of the computer.
Plug the RJ45 connector of the external power unit into the LAN/Power connector of the Network Power Adapter.

Power Supply (MxPoE) Using a Network Power Rack or Network Power Box

Connect the factory pre-installed cable of the camera to the CAM connector of the Network Power Rack (MX-NPR-8/20) or the Network Power Box (MX-NPR-4).
Connect the LAN connector of the Network Power Rack or Network Power Box to an Ethernet connector of the switch/router.

Power Supply (PoE IEEE 802.3af) Using Power-over-Ethernet Products

Connect the factory pre-installed cable of the camera to the Ethernet connector of the PoE switch/router. The switch/router needs to support the PoE standard IEEE 802.3af.

TecPro Solutions

In-Ceiling Set for D22 and Q22

On-Wall Set for D22 and Q22

Vandalism Set

Outdoor Wall Mount for D22 and Q22

Pole Mount for D22 and Q22

ExtIO Extension Module